Filter
Top Products
36 PA/PT400 & PA/PT 403 User’s Guide
correct communications port on the computer is selected. Next, verify
that the same handshaking is in use by both the printer and the
computer. Then, ensure that the communication parameters of the
printer and the computer match. Refer to “Communicating with the
Printer” in “Getting Ready to Print”.
Troubleshooting Tests
Printing a Configuration Label
To print out a listing of the printer’s current configuration (a sample
is shown in Figure 28), refer to “Feed Button Modes” in this chapter.
Recalibration
Recalibrate the printer if it starts to display unusual symptoms, such
as skipping labels. See “Calibration”.
Resetting the Factory Default Values
Resetting the printer to the factory defaults can solve some printer
problems. Follow the instructions in ‘Feed Button Modes” in this chap-
ter.
F
IGURE
28 F
IGURE
29