Filter
Top Products
PA/PT400 & PA/PT 403 User’s Guide 7
Introduction
Thank you for choosing our Zebra Mobile Printer. The PA/PT 400
and PA/PT403 printers are sure to become productive and efficient
additions to your workplace.
• This user’s guide gives you all the information you’ll need to op-
erate your printer.
• There are two basic types of printers in the 400 series: the PA
type which uses direct thermal technology, and the PT type
which uses a thermal transfer film to print.
• There are two models within the 400 series: the cost effective
400 models and the more powerful 403 models with expanded
memory to handle even larger and more complex printing
tasks.
• To create and print label formats, take a look at the
ZPL II Pro-
gram Guide
(part #46530L) for information about Zebra’s label
design programming language, better known as “ZPL II.” If one
was not ordered with your printer, simply call your reseller or
Zebra Technologies Corporation or visit the Zebra web site. If
you’d like to use a different label preparation software, contact
your reseller or Zebra for advice and information.
• The
PA400/PT400 Maintenance Manual
(part #505142L) con-
tains all the information you’ll need to properly maintain the
printer.
Unpacking and Inspection
Inspect the printer for possible shipping damage:
• Check all exterior surfaces for damage.
• Raise the media access door (refer to “Loading the Media” in
the Getting Ready to Print section) and inspect the media com-
partment for damage.
•Save the carton and all packing material in case you have to
return the printerdue to shipping damage.
Reporting Damage
If you discover shipping damage:
• Immediately notify and file a damage report with the shipping
company. Zebra Technologies Corporation is not responsible
for any damage incurred during shipment of the printer and will
not cover the repair of this damage under its warranty policy.
•Keep the carton and all packing material for inspection.
• Notify your authorized Zebra reseller.