Filter
Top Products
PA/PT400 & PA/PT 403 User’s Guide 15
13. Push in the bottom of the media access door to close.
14. Turn on the printer or press the Feed button if the printer is al-
ready on.
NOTES. To ensure optimal print quality, make sure that the
backing material is flush against the peel bar (as shown in
Figure 10). If it starts to “loop “ away from the peel bar, gen-
tly pull down on the backing material
With certain types of media, it may be necessary to reduce
the print speed to 1.5 “ (38. 1mm) per second to produce
consistent peel operation. Consult your authorized Zebra
reseller for advice and information.