Filter
Top Products
Operations
Load Media in Peel-Off Mode
46
13290L-004 Rev. A S4M User Guide 6/15/09
To load media in Peel-Off mode, complete these steps:
1. Press the printhead release latch to open the printhead assembly.
2. Lift the printhead until it latches open.
3. Slide out the media guide.
Caution • While performing any tasks near an open printhead, remove all rings, watches,
hanging necklaces, identification badges, or other metallic objects that could touch the
printhead. You are not required to turn off the printer power when working near an open
printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose
all temporary settings, such as label formats, and you must reload them before you resume
printing.