Filter
Top Products
Prestige 660H/HW Series User’s Guide
Chapter 8 WAN Setup 106
Figure 43 Example of Traffic Shaping
8.5 Zero Configuration Internet Access
Once you turn on and connect the Prestige to a telephone jack, it automatically detects the
Internet connection settings (such as the VCI/VPI numbers and the encapsulation method)
from the ISP and makes the necessary configuration changes. In cases where additional
account information (such as an Internet account user name and password) is required or the
Prestige cannot connect to the ISP, you will be redirected to web screen(s) for information
input or troubleshooting.
Zero configuration for Internet access is disable when
• the Prestige is in bridge mode
• you set the Prestige to use a static (fixed) WAN IP address.
8.6 Configuring WAN Setup
To change your Prestige’s WAN remote node settings, click WAN and WAN Setup. The screen
differs by the encapsulation.