Filter
Top Products
Prestige 660H/HW Series User’s Guide
Chapter 1 Getting To Know Your Prestige 46
Traditionally, routing is based on the destination address only and the router takes the
shortest path to forward a packet. IP Policy Routing (IPPR) provides a mechanism to
override the default routing behavior and alter the packet forwarding based on the policy
defined by the network administrator.
• PPP (Point-to-Point Protocol) link layer protocol.
• Transparent bridging for unsupported network layer protocols.
• RIP I/RIP II
• IGMP Proxy
• ICMP support
• ATM QoS support
• MIB II support (RFC 1213)
Networking Compatibility
Your Prestige is compatible with the major ADSL DSLAM (Digital Subscriber Line Access
Multiplexer) providers, making configuration as simple as possible for you.
Multiplexing
The Prestige supports VC-based and LLC-based multiplexing.
Encapsulation
The Prestige supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483
encapsulation over ATM, MAC encapsulated routing (ENET encapsulation) as well as PPP
over Ethernet (RFC 2516).
Network Management
• Menu driven SMT (System Management Terminal) management
• Embedded web configurator
• CLI (Command Line Interpreter)
• Remote Management via Telnet or Web
•SNMP manageable
• DHCP Server/Client/Relay
• Built-in Diagnostic Tools
•Syslog
• Telnet Support (Password-protected telnet access to internal configuration manager)
• TFTP/FTP server, firmware upgrade and configuration backup/support supported
• Supports OAM F4/F5 loop-back, AIS and RDI OAM cells
Other PPPoE Features
• PPPoE idle time out
• PPPoE Dial on Demand