ZyXEL Communications ES-2024 Switch User Manual


 
ES-2024 Series User’s Guide
Chapter 22 Maintenance 144
CHAPTER 22
Maintenance
This chapter explains how to configure the maintenance screens that let you maintain the
firmware and configuration files.
22.1 The Maintenance Screen
Click Management, Maintenance in the navigation panel to open the following screen.
Figure 69 Maintenance
The following table describes the labels in this screen.
Table 49 Maintenance
LABEL DESCRIPTION
Current This field displays the configuration file (Configuration 1) the switch is currently using.
Firmware
Upgrade
Click Click Here to go to the Firmware Upgrade screen.
Restore
Configuration
Click Click Here to go to the Restore Configuration screen.
Backup
Configuration
Click Click Here to go to the Backup Configuration screen.
Load Factory
Default
Click Click Here to reset the current running configuration to the factory default settings.
Save
Configuration
Click Config 1 to save the current running configuration to the first configuration file.
Reboot
System
Click Config 1 to reboot the system and load Configuration 1 on the switch.
Note: Make sure to click the Save button in any screen to save your
settings to the current configuration on the switch.