ZyXEL Communications ES-2024 Switch User Manual


 
ES-2024 Series User’s Guide
203 Chapter 30 Introducing the Commands
start-addr
<ip> end-
addr <ip>
service
<[telnet]
[ftp][http][
icmp]
[snmp][ssh]
[https]>
Specifies a group of trusted
computer(s) from which an
administrator may use a service to
manage the switch.
13
service-
control
ftp <socket-
number>
Allows FTP access on the
specified service port.
13
http <socket-
number> <timeout>
Allows HTTP access on the
specified service port and defines
the timeout period.
13
https <socket-
number>
Allows HTTPS access on the
specified service port.
13
icmp
Allows ICMP access for services
such as Ping.
13
snmp
Allows SNMP management. 13
ssh <socket-
number>
Allows SSH access on the
specified service port.
13
telnet <socket-
number>
Allows Telnet access on the
specified service port.
13
snmp-server [contact <system
contact>]
[location <system
location>]
Sets the geographic location and
the name of the person in charge
of this switch.
13
get-community
<property>
Sets the get community. 13
set-community
<property>
Sets the set community. 13
trap-community
<property>
Sets the trap community. 13
trap-destination
<ip>
Sets the IP addresses of up to four
stations to send your SNMP traps
to.
13
spanning-
tree
Enables STP on the switch. 13
<port-list>
Enables STP on a specified port. 13
path-cost
<1-65535>
Sets the STP path cost for a
specified port.
13
priority <0-
255>
Sets the priority for a specified
port.
13
Table 72 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE