ZyXEL Communications ES-2024 Switch User Manual


 
ES-2024 Series User’s Guide
183 Chapter 30 Introducing the Commands
VT100 terminal emulation
9600 bps
No parity
8 data bits
1 stop bit
No flow control
30.2.2.1 Initial Screen
When you turn on your switch, it performs several internal tests as well as line initialization.
You can view the initialization information using the console port. After the initialization, the
login screen displays.
30.2.3 Telnet
Use the following steps to telnet into your switch.
1 Make sure your computer IP address and the switch IP address are on the same subnet. In
Windows, click Start (usually in the bottom left corner), Run and then type
telnet
192.168.1.1
(the default management IP address) and click OK.
2 A login screen displays.
30.2.4 SSH
You can use an SSH client program to access the switch. The following figure shows an
example using a text-based SSH client program. Refer to the documentation that comes with
your SSH program for information on using it.
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
initialize switch, ethernet address: 00:13:49:00:00:01
Initializing VLAN Database...
Initializing IP Interface...
Initializing Advanced Applications...
Initializing Command Line Interface...
Initializing Web Interface...
Press ENTER to continue...