Filter
Top Products
ES-2024 Series User’s Guide
Chapter 30 Introducing the Commands 192
interface
[port-channel
<port-list>
[bandwidth-
limit...]]
Resets to the factory default
settings. You can reset sfeature
ettings on a port.
13
exit
Exits Enable (or privileged) mode. 13
help
Displays help information. 13
history
Displays a list of command(s) that
you have previously executed.
13
igmp-flush
Removes all IGMP information. 13
kick tcp <Session
ID>
Resets a TCP connection. Use the
show ip tcp command to get
the Session ID.
13
logout
Exits Enable (or privileged) mode. 13
mac-flush
Clears the MAC address table. 13
<port-num>
Removes all learned MAC address
on the specified port(s).
13
no arp
Clears the ARP table. 13
interface <port-number>
Clears interface statistics. 13
logging
Clears system logs. 13
ping <ip|host-name>
Sends Ping request to an Ethernet
device.
13
[vlan <vlan-
id>][size <0-
1472>] [-t]
Sends Ping request to an Ethernet
device in the specified VLAN(s).
13
help
Displays command help
information.
13
reload config
Restarts the system. 13
show cluster
Displays cluster management
status.
13
candidates
Displays cluster candidate
information.
13
member
Displays the MAC address of the
cluster member(s).
13
member config
Displays the configuration of the
cluster member(s).
13
member mac
<mac-addr>
Displays the status of the cluster
member(s).
13
diffserv
Displays general DiffServ settings. 13
garp
Displays GARP information. 13
https
Displays the HTTPS information. 13
certificate
Displays the HTTPS certificates. 13
key <rsa|dsa>
Displays the HTTPS key. 13
Table 71 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE