Filter
Top Products
ES-2024 Series User’s Guide
73 Chapter 7 Basic Setting
You can configure up to 64 IP addresses which are used to access and manage the switch from
the ports belonging to the pre-defined VLAN(s).
Note: You must configure a VLAN first.
Figure 30 IP Setup
The following table describes the labels in this screen.
Table 11 IP Setup
LABEL DESCRIPTION
Domain
Name Server
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
Default Management IP Address
Configure the fields to set the default management IP address.
DHCP Client Select this option if you have a DHCP server that can assign the switch an IP address
and subnet mask, a default gateway IP address and a domain name server IP address.
Static IP
Address
Select this option if you don't have a DHCP server or if you wish to assign static IP
address information to the switch. You need to fill in the following fields when you select
this option.
IP
Address
Enter the IP address of your switch in dotted decimal notation for example 192.168.1.1.
IP Subnet
Mask
Enter the IP subnet mask of your switch in dotted decimal notation for example
255.255.255.0.