ZyXEL Communications ES-2024 Switch User Manual


 
ES-2024 Series User’s Guide
Chapter 31 Command Examples 214
31.2.3 show logging
Syntax:
show logging
This command displays the system logs. The following figure shows an example.
If you clear a log (by entering
y at the Clear Error Log (y/n):prompt), you cannot view
it again.
31.2.4 show mac address-table all
Syntax:
show mac address-table all <sort>
Where
This command displays the MAC address(es) stored in the switch. The following example
shows the MAC address table.
31.2.5 show pwr
Syntax:
show pwr
sysname# show logging
0 Thu Jan 01 00:01:38 1970 PSSV ERROR Port 2 link up
1 Thu Jan 01 00:01:38 1970 PSSV -WARN SNMP TRAP 2: link down
2 Thu Jan 01 00:01:38 1970 PSSV ERROR Port 3 link up
3 Thu Jan 01 00:01:38 1970 PSSV -WARN SNMP TRAP 2: link down
4 Thu Jan 01 00:01:38 1970 PSSV ERROR Port 4 link up
5 Thu Jan 01 00:01:38 1970 PSSV -WARN SNMP TRAP 2: link down
6 Thu Jan 01 00:01:38 1970 PSSV ERROR Port 5 link up
7 Thu Jan 01 00:01:38 1970 PSSV -WARN SNMP TRAP 2: link down
8 Thu Jan 01 00:01:38 1970 PSSV ERROR Port 6 link up
9 Thu Jan 01 00:01:38 1970 PSSV -WARN SNMP TRAP 2: link down
10 Thu Jan 01 00:01:38 1970 PSSV ERROR Port 7 link up
Clear Error Log (y/n):
<sort>
= Specifies the sorting criteria (MAC, VID or port).
sysname# show mac address-table all
Port VLAN ID MAC Address Type
2 1 00:85:a0:01:01:04 Dynamic
sysname#