ZyXEL Communications ES-2024 Switch User Manual


 
ES-2024 Series User’s Guide
191 Chapter 30 Introducing the Commands
30.11.2 Enable Mode
The following table describes the commands available for Enable mode.
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in a
VLAN.
0
help
Displays command help information. 0
Table 70 Command Summary: User Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 71 Command Summary: Enable Mode
COMMAND DESCRIPTION PRIVILEGE
baudrate <1|2|3|4|5>
Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5
(115200).
13
boot config
Restarts the system. 13
cable-
diagnostics
<port-list>
Performs a basic connectivity test
on the ports. Displays “Ok” if
connector is inserted in the port,
“Open” if no connector is inserted
in the port or “Unknown” if this test
cannot determine the status.
13
configure
Accesses Configuration mode. See
Section 30.11.3 on page 196.
13
copy running-config help
Displays command help
information.
13
interface port-
channel <port-
list>[bandwidth
-limit ....]
Copies the specified attributes
from one port to other ports.
13
tftp <ip>
<remote-file>
Backs up running configuration to
the specified TFTP server with the
specified file name.
13
tftp config <index>
<ip> <remote-
file>
Restores configuration with the
specified filename from the
specified TFTP server.
13
flash <ip>
<remote-file>
Restores firmware via TFTP. 13
disable
Exits Enable (or privileged) mode. 13
enable
Accesses Enable (or privileged)
mode.
13
erase running-config help
Displays command help
information.
13