ZyXEL Communications ES-2024 Switch User Manual


 
ES-2024 Series User’s Guide
93 Chapter 10 Filtering
Add Click Add to save the new rule to the switch. It then displays in the summary table at the
bottom of the screen.
The switch loses these changes if it is turned off or loses power, so use the Save link on
the top navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Cancel Click Cancel to reset the fields to your previous configuration.
Clear Click Clear to clear the fields to the factory defaults.
Index This field displays the index number of the rule. Click an index number to change the
settings.
Active This field displays Yes when the rule is activated and No when is it deactivated.
Name This field displays the descriptive name for this rule. This is for identification purpose
only.
MAC
Address
This field displays the source/destination MAC address with the VLAN identification
number to which the MAC address belongs.
VID This field displays the ID of the VLAN to which this filter applies.
Delete Check the rule(s) that you want to remove in the Delete column and then click the
Delete button.
Cancel Click Cancel to clear the selected checkbox(es) in the Delete column.
Table 20 Filtering (continued)
LABEL DESCRIPTION