ZyXEL Communications ES-2024 Switch User Manual


 
ES-2024 Series User’s Guide
207 Chapter 30 Introducing the Commands
dir
<ingress|egress
|both>
Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
13
name <port-
name-string>
Sets a name for the port(s).
Enter a descriptive name (up to
nine printable ASCII
characters).
13
no bandwidth-limit
egress
Disables bandwidth limit for
outgoing traffic.
13
bandwidth-limit
ingress
Disables bandwidth limit for
incoming traffic.
13
bmstorm-limit
Disables broadcast storm
control limit on the port(s).
13
diffserv
Disables DiffServ on the
port(s).
13
egress set
<port-list>
Sets the outgoing traffic port list
for a port-based VLAN.
13
flow-control
Disables flow control on the
port(s).
13
gvrp
Disable GVRP on the port(s). 13
igmp-filtering
profile
Disables IGMP filtering on the
port.
13
igmp-group-
limited
Disables IGMP group limitation. 13
igmp-immediate-
leave
Disables IGMP immediate leave
on the port.
13
inactive
Enables the port(s) on the
switch.
13
intrusion-lock
Disables intrusion-lock on a port
so that a port can be connected
again after you disconnected
the cable.
13
mirror
Disables port mirroring on the
port(s).
13
vlan-trunking
Disables VLAN trunking on the
port(s).
13
pvid <1-4094>
The default PVID is VLAN 1 for
all ports. Sets a PVID in the
range 1 to 4094 for the specified
interface.
13
qos priority <0
.. 7>
Sets the quality of service
priority for an interface.
13
Table 73 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE