Filter
Top Products
ES-2024 Series User’s Guide
Chapter 8 VLAN 84
8.5.4 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a
port. Refer to Section 8.1 on page 78 for more information on static VLAN. Click the VLAN
Port Setting link in the VLAN Status screen.
Figure 37 VLAN: VLAN Port Setting
The following table describes the labels in this screen.
Add Click Add to add the settings as a new entry in the summary table below.
The switch loses these changes if it is turned off or loses power, so use the Save link
on the top navigation panel to save your changes to the non-volatile memory when
you are done configuring.
Cancel Click Cancel to reset the fields.
Clear Click Clear to start configuring the screen again.
VID This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
Active This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
Name This field displays the descriptive name for this VLAN group.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the Delete check boxes.
Table 16 VLAN: Static VLAN (continued)
LABEL DESCRIPTION