Filter
Top Products
ES-2024 Series User’s Guide
63 Chapter 6 System Status and Port Statistics
LACP This field shows if LACP is enabled on this port or not.
TxPkts This field shows the number of transmitted frames on this port
RxPkts This field shows the number of received frames on this port
Errors This field shows the number of received errors on this port.
Tx KB/s This field shows the number kilobytes per second transmitted on this port.
Rx KB/s This field shows the number of kilobytes per second received on this port.
Up Time This field shows the total amount of time the connection has been up.
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packets This field shows the number of good packets (unicast, multicast and broadcast)
transmitted.
Multicast This field shows the number of good multicast packets transmitted.
Broadcast This field shows the number of good broadcast packets transmitted.
Pause This field shows the number of 802.3x Pause packets transmitted.
Rx Packet
The following fields display detailed information about packets received.
RX Packets This field shows the number of good packets (unicast, multicast and broadcast)
received.
Multicast This field shows the number of good multicast packets received.
Broadcast This field shows the number of good broadcast packets received.
Pause This field shows the number of 802.3x Pause packets received.
TX Collision
The following fields display information on collisions while transmitting.
Single This is a count of successfully transmitted frames for which transmission is
inhibited by exactly one collision.
Multiple This is a count of successfully transmitted frames for which transmission was
inhibited by more than one collision.
Excessive This is a count of frames for which transmission failed due to excessive collisions.
Excessive collision is defined as the number of maximum collisions before the
retransmission count is reset.
Late This is the number of times a late collision is detected, that is, after 512 bits of the
frame have already been transmitted.
Error Packet
RX CRC This field shows the number of packets received with CRC (Cyclic Redundant
Check) error(s).
Runt This field shows the number of packets received that were too short (shorter than
64 octets), including the ones with CRC errors.
Distribution
64 This field shows the number of packets (including bad packets) received that
were 64 octets in length.
65-127 This field shows the number of packets (including bad packets) received that
were between 65 and 127 octets in length.
Table 7 Status: Port Details (continued)
LABEL DESCRIPTION