Filter
Top Products
ES-2024 Series User’s Guide
45 Chapter 3 Hardware Overview
Figure 12 Installed Transceiver
3.1.3.2 Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module).
1 Open the transceiver’s latch (latch styles vary).
Figure 13 Opening the Transceiver’s Latch Example
2 Pull the transceiver out of the slot.
Figure 14 Transceiver Removal Example
3.2 Rear Panel
The following figure shows the rear panel of the switch. The power receptacle is on the read
panel.
Figure 15 Rear Panel
3.2.1 Power Connector
Make sure you are using the correct power source as shown on the panel.