Filter
Top Products
Dimension ES-3124 Ethernet Switch
Cluster Management 25-5
Figure 25-5 Configuring Cluster Management
The following table describes the labels in this screen.
Table 25-4 Configuring Cluster Management
LABEL DESCRIPTION
Active Select Active to have this switch become the cluster manager switch. A cluster can only
have one manager. Other (directly connected) switches that are set to be cluster managers
will not be visible in the Clustering Candidates list. If a switch that was previously a cluster
member is later set to become a cluster manager, then its Status is displayed as Error in
the Cluster Management Status screen and a warning icon (
) appears in the member
summary list below.
Name Type a name to identify the Clustering Manager. You may use up to 32 printable
characters (no spaces are allowed).