Filter
Top Products
Dimension ES-3124 Ethernet Switch
30-6 IEEE 802.1Q Tagged VLAN
30.4.9 vlan1q port gvrp
Syntax:
sys sw vlan1q port gvrp <port> <enable|disable>
where
<port> =
A port number
<enable|disable> =
Turn GVRP on or off.
This command turns GVRP on or off for the specified port.
The following example turns off GVRP for port 2.
Figure 30-10 vlan1q port gvrp Command Example
30.4.10 vlan1q svlan cpu
Syntax:
sys sw vlan1q svlan cpu <VLAN ID>
where
<VID> =
The VLAN ID. Valid parameter range = [1 – 4094].
This command sets the management VLAN (CPU). You can only use ports that are members of this management
VLAN in order to manage the switch.
The following example sets VLAN ID 2 to be the CPU (management) VLAN.
Figure 30-11 vlan1q svlan cpu Command Example
30.4.11 vlan1q svlan setentry
Syntax:
sys sw vlan1q svlan setentry <name> <VID> <PORT> <ADCTL> <TAGCTL>
where
<name> =
A name to identify the SVLAN entry.
<VID> =
The VLAN ID [1 – 4094].
<PORT> =
This is the switch port number.
ES-3124> sys sw vlan1q port gvrp 2 disable
ES-3124> sys sw vlan1q svlan cpu 2