Filter
Top Products
Dimension ES-3124 Ethernet Switch
Command Examples 29-1
Chapter 29
Command
Examples
This chapter describes some commands in more detail.
29.1 Commonly Used Commands Overview
These are commands that you may use frequently in configuring and maintaining your switch. See the following
chapter for IEEE 802.1Q Tagged VLAN commands.
29.2 sys Commands
These are the commonly used commands that belong to the sys (system) group of commands.
29.2.1 sys log disp
Syntax:
sys log disp
This command displays the system error log. An example is shown next.
Figure 29-1 sys log disp Command Example
29.2.2 sys log clear
Syntax:
sys log clear
This command clears the system error log.
If you clear a log (using the sys log clear command), you cannot view it again.
29.2.3 sys version
Syntax:
sys version
This command shows the firmware version, system uptime and bootbase version.
ES-3124> sys log disp
60 Thu Jan 1 00:00:04 1970 PINI -WARN SNMP TRAP 0: cold start
61 Thu Jan 1 00:00:04 1970 PINI INFO main: init completed
62 Thu Jan 1 00:00:09 1970 PP19 INFO adjtime task pause 1 day
Clear Error Log (y/n):