Filter
Top Products
Dimension ES-3124 Ethernet Switch
Introduction to CLI 28-9
Table 28-2 Command Summary: sys sw
COMMAND DESCRIPTION
enable <port_no>
Enables LACP on the specified
port.
disable <port_no>
Disables LACP on the specified
port.
status <port_no>
Displays whether LACP is
enabled on the specified port.
actorAdm activity [port_no]
[0:passive 1:active]
Allows/disallows the specified
local port to engage in trunking.
actorAdm display [port_no]
Shows whether the specified
local port is engaged in trunking.
actorAdm key [port_no][key]
Shows the specified local port
LACP key.
actorAdm priority [port_no]
[priority]
Sets the specified local port
LACP priority.
actorAdm timeout [port_no]
[0:long_timeout|1:short_timeout]
Enables a short or long timeout
on the specified local port.
status <Port_NO>
Displays LACP status on a port.
keymgnt [on|off]
Turns LACP key management on
or off.
syspriority <priority>
Sets the LACP system priority.
The switch with the lowest
priority becomes the LACP
“server”.
trace
Sets the LACP debug level.
dot1x
“sys sw dot1x” commands relate
to IEEE 802.1X security.
enable
Enables 802.1X security on the
switch.
disable
Disables 802.1X security on the
switch.
status
Shows switch 802.1X security
status.
port
enable <port_no>
Enables 802.1X security on the
specified port.
disable <port_no>
Disables 802.1X security on the
specified port.
reauth <port_no> <on|off>
Turns re-authentication on or off
on the specified port.
period <port_no><value>
Configures how often the
specified port should be re-
authenticated.