Filter
Top Products
Dimension ES-3124 Ethernet Switch
Introduction to CLI 28-7
Table 28-2 Command Summary: sys sw
COMMAND DESCRIPTION
qos defpri <port> [<0..7>]
Sets the default ingress User
Priority for a port.
map <0..7> [<queue>]
Maps a user priority to a traffic
class.
method <strict | wfq>
Sets QoS method.
weight <port> wt1 wt2 wt3 wt4 wt5 wt6 wt7
wt8 (0<weight<16)
Shows the queue weight on the
specified port.
vlan1q
All “sys sw vlan1q” commands
relate to IEEE 802.1Q Tagged
VLAN configuration. Use “config
save” to save your configuration
changes.
port status <port>
Shows a port’s VLAN
information.
defaultVID <port><vid>
Sets the default VLAN ID of a
port.
accept <port> <all|tagged|untagged>
Sets the type of frames that a
port accepts.
gvrp <port> <enable|disable>
Enables/disables GVRP on the
specified port.
vlanTrunking <port> <enable|disable>
Enables/disables VLAN trunking
on the specified port.
svlan cpu <vlan id>
Sets the VLAN ID of the
management VLAN (CPU).
setentry<name><vid><port><adctl>
<tagctl>
Applies a static VLAN (name,
admin control tag, tag control) to
a port.
delentry <vid>
Deletes the specified (VID) static
VLAN.
active <vid>
Turns on the specified static
VLAN.
inactive <vid>
Turns off the specified static
VLAN.
list
Displays a table of static VLANs.
vlan list <all|vid|start_vid end_vid>
Shows the specified IEEE
802.1Q Tagged VLAN table.
status
Shows the IEEE 802.1Q tagged
status.
driver
config
Shows the switch’s settings.
count
disp
Shows the switch Network Driver
Interface Specifications (NDIS)
level counters (CPU interface).