Filter
Top Products
Dimension ES-3124 Ethernet Switch
28-16 Introduction to CLI
Table 28-4 Command Summary: ip
COMMAND DESCRIPTION
limit [value]
Sets a TCP output window limit.
mss [value]
Inputs the TCP Maximum
Segment Size.
reset <tcb>
Resets the TCP connection of the
specified TCP Control Block.
rtt <tcb> <value>
Sets the round trip time for the
TCP control block.
Status [tcb] [<interval>]
Displays the TCP statistic
counters.
syndata [on|off]
Turns on/off the option to send
data with the SYN packet.
trace [on|off]
Turns on/off the trace for
debugging.
telnet <host> [port]
Telnets to the specified host.
tftp
TFTP to the specified host.
tredir failcount
Sets how many times after failed.
partner
Sets the IP address of a partner
gateway.
target
Sets the target IP address.
timeout
Sets the time that elapses before
disconnection.
checktime
Sets the time interval between
checks.
active
Enables traffic redirect.
save
Saves the changes.
disp
Shows the connection settings and
status.
mvid [vid]
Sets the management VLAN ID.
traceroute <host> [ttl] [wait]
[queries]
Sends ICMP packets to trace the
route of a remote host.
igmpsnoop status
Displays the IGMP group table.
querier
Displays the port number of the
incoming port that received the
latest IGMP querier.
enable
Turns on IGMP snooping.
disable
Turns off IGMP snooping.
dhcp <iface> mode <none | client>
Sets an interface to accept
information from a DHCP server.