Appendix C Windows Wireless Management
N220 User’s Guide
167
The following table describes the labels in this screen.
Table 38 Windows XP: Protected EAP Properties
LABEL DESCRIPTION
Validate server
certificate
Select the check box to verify the certificate of the authentication
server.
Connect to
these servers
Select the check box and specify a domain in the field below to have
your computer connect to a server which resides only within this
domain.
Trusted Root
Certification
Authorities:
Select a trusted certification authority from the list below.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Do not prompt
user to
authorize new
server or
trusted
certification
authorities.
Select this check box to verify a new authentication server or trusted CA
without prompting.
This field is available only if you installed the Windows XP server pack 2.
Select
Authentication
Method:
Select an authentication method from the drop-down list box and click
Configure to do settings.
Enable Fast
Reconnect
Select the check box to automatically reconnect to the network (without
re-authentication) if the wireless connection goes down.
OK Click OK to save your changes.
Cancel Click Cancel to leave this screen without saving any changes you may
have made.