Filter
Top Products
Chapter 4 Station Mode
N220 User’s Guide
55
4.4.1 Security Settings
When you configure the N220 to connect to a network with wireless security
activated and the security settings are disabled on the N220, the screen varies
according to the encryption method used by the selected network.
4.4.1.1 Security Type Selection
When you choose to connect to a network that has security, you are presented
with is a security selection screen. Choose the security of the network you are
attempting to join.
Figure 32 Security Setting Selection
The following table describes the labels in this screen.
Network Type This field displays the network type (Infrastructure or Ad Hoc) of the
wireless device.
Channel This field displays the channel number used by each wireless device.
Security This field shows whether data encryption is activated (WEP, WPA,
WPA-PSK, WPA2, WPA2-PSK or 802.1x) or inactive (DISABLE).
MAC address This field displays the MAC address of the wireless device.
Surveyed at This field displays the time when the wireless device was scanned.
Table 7 Site Survey (continued)
LABEL DESCRIPTION
Table 8 Security Setting: WEP
LABEL DESCRIPTION
Security Type Select the security type that matches the security setting of the
network you’re trying to join.
The options are: WEP, WPA, WPA2, WPA-PSK, WPA2-PSK, and
802.1x.
Back Click Back to go to the Site Survey screen to select and connect to
another network.