Filter
Top Products
Chapter 4 Station Mode
N220 User’s Guide
66
3 If you selected Infrastructure network type in the first screen, select WEP,
WPA, WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to
enable data encryption. If you selected Ad-Hoc network type in the first screen,
you can use only WEP encryption method. Otherwise, select DISABLE to allow
the N220 to communicate with the access points or other peer wireless computers
without any data encryption, and skip to step 5.
Figure 41 Profile: Wireless Settings
4 The screen varies depending on the encryption method you select in the previous
screen. The settings must be exactly the same on the AP or other peer wireless
computers as they are on the N220. Refer to Section 5.4.1 on page 80 for detailed
information on wireless security configuration.
Figure 42 Profile: Security Settings