Filter
Top Products
Chapter 5 AP Mode
N220 User’s Guide
81
5.4.1.3 WPA-PSK/WPA2-PSK
Configure WPA-PSK and WPA2-PSK security with these options.
Figure 59 Security Setting: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Key 1-4 Select this option if you want to manually enter a transmit key. Enter
the key in the field provided.
If you select 64 Bits in the WEP field.
Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-
9” (for example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z”
and “0-9” (for example, MyKey) for ASCII key type.
If you select 128 Bits in the WEP field,
Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-
9” (for example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z”
and “0-9” (for example, MyKey12345678) for ASCII key type.
Note: The values for the WEP keys must be set up exactly the
same on all wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
Save Click to save the changes.
Cancel Click to discard the changes.
Table 23 Security Setting: WEP (continued)
LABEL DESCRIPTION
Table 24 Security Setting: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Security Type Select either WPA-PSK or WPA2-PSK to enable these encryption
types.
Encryption Type Select the encryption type (TKIP or AES) for data encryption.