Filter
Top Products
Chapter 4 Station Mode
N220 User’s Guide
56
4.4.1.2 WEP Encryption
Configure WEP security in this screen.
Figure 33 Security Setting: WEP
The following table describes the labels in this screen.
Next Click Next to confirm your selections and advance to the Security
Settings screen that corresponds to the one you select here.
Exit Click Exit to return to the Site Survey screen without saving.
Table 8 Security Setting: WEP (continued)
LABEL DESCRIPTION
Table 9 Security Setting: WEP
LABEL DESCRIPTION
Security
Settings
WEP Select 64 Bits or 128 Bits to activate WEP encryption and then fill in
the related fields.
Authentication
Type
Select an authentication method. Choices are Open and Shared.
Refer to Section 3.3.1.1.2 on page 40 for more information.
Pass Phrase Enter a passphrase of up to 32 case-sensitive printable characters. As
you enter the passphrase, the N220 automatically generates four
different WEP keys and displays the first in the key field below. Refer to
Section 3.3.1.1.1 on page 39 for more information.
Transmit Key Select a default WEP key to use for data encryption. The key displays in
the adjacent field.