Filter
Top Products
Chapter 4 Station Mode
N220 User’s Guide
70
and PIN - Use this Device’s PIN in the Adapter screen. The following screen
displays.
Figure 47 WPS: PIN - Use this Device’s PIN
The following table describes the labels in this screen.
4.6.3 WPS: PIN - Use the PIN from the AP or Wireless Router
This screen allows you to use the WPS Personal Identification Number mode, by
entering the PIN from another WPS-enabled device into the N220’s utility. See
Section 3.4.2 on page 42 for more information. Select WPS and PIN - Use the
Table 18 WPS: PIN - Use this Device’s PIN
LABEL DESCRIPTION
This device’s PIN This is the N220’s Personal Identification Number (PIN).
This field is read-only. Enter the number that displays in
this field into the configuration interface of the other WPS-
enabled device.
Note: Each time this screen displays, the PIN is
different. The PIN is valid for only one WPS
transaction.
Start Click this to start WPS. You must start WPS on the other
WPS-enabled device within two minutes.