ZyXEL Communications NSA310 Server User Manual


 
Chapter 3 NAS Starter Utility for NSA210
Media Server User’s Guide
37
After the NAS Starter Utility finishes configuring the NSA, you can click Show the directory of the
NAS to see the NSA’s shares (see Section 3.5.3 on page 42) or click Finish to return to the main
NAS Starter Utility screen (see Section 3.4 on page 33).
Figure 25 Setting the NAS
3.5.2 Manual Configuration
1 Set up the NSA’s basic network configuration first.
Figure 26 Setup Network
The following table describes the labels in this screen.
Table 7 NAS Starter Utility > Config
LABEL DESCRIPTION
Get IP
automatically from
DHCP server
Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP
server in your network.
Assign IP Manually Select this if you want to assign the NSA a fixed IP address, subnet mask and default
gateway.
Note: Do not configure an IP address that is already in use in your network. This results to
a network IP address conflict and makes the NSA inaccessible.