ZyXEL Communications NSA310 Server User Manual


 
Chapter 3 NAS Starter Utility for NSA210
Media Server User’s Guide
40
6 Select how to configure the hard disks.
Figure 31 Choose HDD Configuration
With only one hard disk installed, just click Next. If you have two hard disks installed choose one
of the following:
RAID 1: Use this to mirror all data on one disk to the other disk to protect against data loss.
Individual Disks: Use this if you want maximum storage capacity and/or you have other means
of protecting your data. This creates two JBOD volumes (with one disk in each), a failure of
one disk (volume) should not affect the other volume (disk).
JBOD: Use this if you want maximum storage capacity and/or you have other means of
protecting your data. This combines the two physical disks into a single virtual one, so they
appear as a single large disk.
RAID 0: Use this if you want maximum speed for your disks, and/or you have other means of
protecting your data. RAID 0 has the fastest read and write performance but if one disk fails
you lose all your data from both disks.
7 This screen lists the shares the NAS Starter Utility creates on the NSA by default. Select the ones
you want to use as network drives in Windows Explorer.
Figure 32 Connect Network Drives