Filter
Top Products
ZyAIR Wireless Gateway Series User’s Guide
13-2 Remote Management
1. A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web
service.
2. You have disabled that service in one of the remote management screens.
3. The IP address in the Secured Client IP Address field does not match the client IP address. If it
does not match, the ZyAIR will disconnect the session immediately.
4. There is already another remote management session with an equal or higher priority running. You
may only have one remote management session running at one time.
5. There is a firewall rule that blocks it.
13.1.2 Remote Management and NAT
When NAT is enabled:
Use the ZyAIR’s WAN IP address when configuring from the WAN.
Use the ZyAIR’s LAN IP address when configuring from the LAN.
13.1.3 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The ZyAIR
automatically logs you out if the management session remains idle for longer than this timeout period. The
management session does not time out when a statistics screen is polling. You can change the timeout period
in the System screen.
13.2 Telnet
You can telnet into the ZyAIR to perform remote management.
Figure 13-1 Telnet Configuration on a TCP/IP Network