Filter
Top Products
ZyAIR Wireless Gateway Series User’s Guide
30-2 Remote Management
30.4.1 Remote Management Setup
Remote management setup is for managing Telnet, FTP and Web services. You can customize the service
port, access interface and the secured client IP address to enhance security and flexibility.
You may manage your ZyAIR from a remote location via:
the Internet (WAN only), the LAN only, All (LAN and WAN) or Disable (neither).
WAN only (Internet) ALL (LAN and WAN)
LAN only Disable (Neither)
If you enable remote management of a service, but have applied a filter to block
the service, then you will not be able to remotely manage the service.
Enter 11, from menu 24, to display Menu 24.11 - Remote Management Control (shown next).
Figure 30-2 Menu 24.11 Remote Management Control
The following table describes the fields in this menu.
Menu 24.11 - Remote Management Control
TELNET Server: Port = 23 Access = LAN only
Secured Client IP = 0.0.0.0
FTP Server: Port = 21 Access = LAN only
Secured Client IP = 0.0.0.0
Web Server: Port = 80 Access = LAN only
Secured Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = ALL
Secured Client IP = 0.0.0.0
DNS Service: Port = 53 Access = ALL
Secured Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: