Filter
Top Products
ZyAIR Wireless Gateway Series User’s Guide
1-6 Getting to Know Your ZyAIR
SNMP
SNMP (Simple Network Management Protocol) is a protocol used for exchanging management
information between network devices. SNMP is a member of the TCP/IP protocol suite. Your ZyAIR
supports SNMP agent functionality, which allows a manger station to manage and monitor the ZyAIR
through the network. The ZyAIR supports SNMP version one (SNMPv1) and version two c (SNMPv2c).
Full Network Management
The embedded web configurator is an all-platform web-based utility that allows you to easily access the
ZyAIR’s management settings. Most functions of the ZyAIR are also software configurable via the SMT
(System Management Terminal) interface. The SMT is a menu-driven interface that you can access from a
terminal emulator through the console port or over a telnet connection.
Logging and Tracing
♦ Built-in message logging and packet tracing.
♦ Unix syslog facility support.
Diagnostics Capabilities
The ZyAIR can perform self-diagnostic tests. These tests check the integrity of the following circuitry:
♦ FLASH memory
♦ DRAM
♦ LAN port
♦ Wireless port
Embedded FTP and TFTP Servers
The ZyAIR’s embedded FTP and TFTP servers enable fast firmware upgrades as well as configuration file
backups and restoration.
Wireless Association List
With the Wireless Association List, you can see the list of the wireless stations that are currently using the
ZyAIR to access your wired network.
Wireless LAN Channel Usage
The Wireless Channel Usage displays whether the radio channels are used by other wireless devices within
the transmission range of the ZyAIR. This allows you to select the channel with minimum interference for
your ZyAIR.