Filter
Top Products
ZyAIR Wireless Gateway Series User’s Guide
26-4 System Security
Figure 26-5 Menu 23.4 System Security : IEEE802.1x
The following table describes the fields in this menu.
Table 26-2 Menu 23.4 System Security : IEEE802.1x
FIELD DESCRIPTION
Wireless Port
Control
Press [SPACE BAR] and select a security mode for the wireless LAN access.
Select No Authentication Required to allow any wireless stations access to your
wired network without entering usernames and passwords. This is the default setting.
Selecting Authentication Required means wireless stations have to enter usernames
and passwords before access to the wired network is allowed.
Select No Access Allowed to block all wireless stations access to the wired network.
The following fields are not available when you select No Authentication Required or
No Access Allowed.
ReAuthentica-
tion Timer
(in second)
Specify how often a client has to re-enter username and password to stay connected to
the wired network.
This field is activated only when you select Authentication Required in the Wireless
Port Control field. Enter a time interval between 10 and 9999 (in seconds). The default
time interval is 1800 seconds (or 30 minutes).
Menu 23.4 - System Security - IEEE802.1x
Wireless Port Control= Authentication Required
ReAuthentication Timer (in second)= 1800
Idle Timeout (in second)= 3600
Key Management Protocol= 802.1x
Dynamic WEP Key Exchange= Disable
PSK= N/A
WPA Mixed Mode= N/A
Group Data Privacy= N/A
WPA Group Key Update Timer= N/A
Authentication Databases= Local User Database Only
Press ENTER to Confirm or ESC to Cancel::