Filter
Top Products
ZyAIR Wireless Gateway Series User’s Guide
15-10 Logs Screens
Table 15-4 Protocol/Port Report
LABEL DESCRIPTION
Refresh
Click Refresh to update the report display. The report also refreshes automatically when
you close and reopen the screen.
Direction
This field displays Incoming to denote traffic that is coming in from the WAN to the LAN.
This field displays Outgoing to denote traffic that is going out from the LAN to the WAN.
Amount This column lists how much traffic has been sent and/or received for each protocol or
service port. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies with
the amount of traffic for the particular protocol or service port. The count starts over at 0
if a protocol or port passes the bytes count limit (see Table 15-6).
15.3.2 Viewing LAN IP Address
In the Reports screen, select LAN IP Address from the Report Type drop-down list box to have the
ZyAIR record and display the LAN IP addresses that the most traffic has been sent to and/or from and how
much traffic has been sent to and/or from those IP addresses.
Computers take turns using dynamically assigned LAN IP addresses. The ZyAIR
continues recording the bytes sent to or from a LAN IP address when it is
assigned to a different computer.
Figure 15-5 LAN IP Address Report