Filter
Top Products
ZyAIR Wireless Gateway Series User’s Guide
LAN Setup 19-7
Figure 19-8 Menu 3.5 Wireless LAN Setup
The following table describes the fields in this menu.
Table 19-4 Menu 3.5 Wireless LAN Setup
FIELD DESCRIPTION EXMAPLE
ESSID
The ESSID (Extended Service Set IDentity) identifies the AP to which the
wireless stations associate. Wireless stations associating to the AP must
have the same ESSID. Enter a descriptive name of up to 32 printable 7-bit
ASCII characters.
Wireless
Hide ESSID
Press [SPACE BAR] and select Yes to hide the ESSID in the outgoing data
frame so an intruder cannot obtain the ESSID through passive scanning.
No
Channel ID
Press [SPACE BAR] to select a channel. This allows you to set the
operating frequency/channel depending on your particular region.
CH01
2412MHz
RTS
Threshold
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a
value between 0 and 2432.
2432
Fragment
Threshold
This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
2432
Menu 3.5 - Wireless LAN Setup
ESSID= Wireless
Hide ESSID= No
Channel ID= CH01 2412MHz
RTS Threshold= 0
Frag. Threshold= 2432
WEP Encryption= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
Edit MAC Address Filter= No
Edit Roaming Configuration= No
Block Intra-BSS Traffic= No
Number of Associated Stations= 32
Breathing LED= Yes
Output Power= 17dBm
Press ENTER to Confirm or ESC to Cancel: