Filter
Top Products
ZyAIR Wireless Gateway Series User’s Guide
System Maintenance and SMT Menu 24.8 to 24.10 29-1
Chapter 29
System Maintenance and SMT Menu
24.8 to 24.10
This chapter leads you through SMT menus 24.8 to 24.10.
29.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from
the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed
information on CI commands. Enter 8 from Menu 24 – System Maintenance. A list of valid commands
can be found by typing help or ? at the command prompt. Type exit to return to the SMT main menu
when finished.
Figure 29-1 Menu 24 System Maintenance
Figure 29-2 Valid CI Commands
Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit device ether
poe pptp config wlan
ip ppp bridge hdap
cnm radius 8021x
ras>
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: