Filter
Top Products
ZyAIR Wireless Gateway Series User’s Guide
Remote Node Configuration 21-3
Table 21-1 Menu 11.1 Remote Node Profile
FIELD DESCRIPTION EXAMPLE
Outgoing:
My Login Type the login name assigned by your ISP when the ZyAIR calls
this remote node.
My Password Type the password assigned by your ISP when the ZyAIR calls this
remote node.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
PAP
CHAP/PAP – Your ZyAIR will accept either CHAP or PAP when
requested by this remote node.
CHAP – accept CHAP (Challenge Handshake Authentication
Protocol) only.
Authen
PAP – accept PAP (Password Authentication Protocol) only.
PPTP:
My IP Address Type the (static) IP address assigned to you by your ISP in dotted
decimal notation.
10.11.12.13
My IP Mask Type the subnet mask of the PPTP server.
Server IP Address Type the IP address of the PPTP server in dotted decimal notation.
Connection
ID/Name
Enter the connection ID or connection name in this field. It must
follow the "c:id" and "n:name" format. For example, C:12 or N:My
ISP.
This field is optional and depends on the requirements of your DSL
modem.
Route
This field determines the protocol used in routing. Options are IP
and None.
IP
(default)
Edit IP
Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.3 – Remote Node Network Layer Options.
No
Telco Option:
Telco Option is available only for PPTP or PPPoE encapsulation.
Allocated
Budget (min)
This sets a ceiling for outgoing call time for this remote node. The
default for this field is 0 meaning no budget control.
0
(default)