ZyWALL 5/35/70 Series User’s Guide
Chapter 27 Remote Management 442
Figure 222 Secure FTP: Firmware Upload Example
$ sftp -1 192.168.1.1
Connecting to 192.168.1.1...
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be
established.
RSA1 key fingerprint is
21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of
known hosts.
Administrator@192.168.1.1's password:
sftp> put firmware.bin ras
Uploading firmware.bin to /ras
Read from remote host 192.168.1.1: Connection reset by peer
Connection closed
$
27.11 Telnet
You can configure your ZyWALL for remote Telnet access as shown next.
Figure 223 Telnet Configuration on a TCP/IP Network
27.12 Configuring TELNET
Click ADVANCED, REMOTE MGMT and then the TELNET tab to configure your
ZyWALL for remote Telnet access.
Note: It is recommended that you disable Telnet and FTP when you configure SSH
for secure connections.