Filter
Top Products
ZyWALL 5/35/70 Series User’s Guide
627 Chapter 48 System Maintenance Menus 8 to 10
Figure 388 Budget Management
Menu 24.9.1 - Budget Management
Remote Node Connection Time/Total Budget Elapsed Time/Total Period
1.WAN_1 No Budget No Budget
2.WAN_2 No Budget No Budget
3.Dial No Budget No Budget
Reset Node (0 to update screen):
The total budget is the time limit on the accumulated time for outgoing calls to a remote node.
When this limit is reached, the call will be dropped and further outgoing calls to that remote
node will be blocked. After each period, the total budget is reset. The default for the total
budget is 0 minutes and the period is 0 hours, meaning no budget control. You can reset the
accumulated connection time in this menu by entering the index of a remote node. Enter 0 to
update the screen. The budget and the reset period can be configured in menu 11.1 for the
remote node.
Table 234 Budget Management
FIELD DESCRIPTION EXAMPLE
Remote Node Enter the index number of the remote node you
want to reset (just one in this case)
1
Connection Time/
Total Budget
This is the total connection time that has gone by
(within the allocated budget that you set in menu
11.1).
5/10 means that 5 minutes
out of a total allocation of 10
minutes have lapsed.
Elapsed Time/Total
Period
The period is the time cycle in hours that the
allocation budget is reset (see menu 11.1.) The
elapsed time is the time used up within this
period.
0.5/1 means that 30 minutes
out of the 1-hour time period
has lapsed.
Enter “0” to update the screen or press [ESC] to return to the previous screen.
48.2.2 Call History
This is the second option in Menu 24.9 - System Maintenance - Call Control. It displays
information about past incoming and outgoing calls. Enter 2 from Menu 24.9 - System
Maintenance - Call Control to bring up the following menu.