Filter
Top Products
ZyWALL 5/35/70 Series User’s Guide
641 Chapter 50 IP Policy Routing
Figure 396 Example of IP Policy Routing
To force Web packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64
to be routed to the Internet via the WAN port of the ZyWALL, follow the steps as shown next.
1 Create a rule in Menu 25.1 - IP Routing Policy Setup as shown next.
Figure 397 IP Routing Policy Example 1
Menu 25.1 - IP Routing Policy Setup
Rule Index= 1 Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care Packet length= 10
Precedence = Don't Care Len Comp= Equal
Source:
addr start= 192.168.1.33 end= 192.168.1.64
port start= 0 end= N/A
Destination:
addr start= 0.0.0.0 end= N/A
port start= 80 end= 80
Action= Matched
Gateway Type= IP Address
Gateway addr = 192.168.1.1 Redirect packet= N/A
Type of Service= Max Thruput Log= No
Precedence = 0
Edit policy to packets received from= No
Press ENTER to Confirm or ESC to Cancel:
2 Select Yes in the LAN field in menu 25.1.1 to apply the policy to packets received on the
LAN port.
3 Check Menu 25 - IP Routing Policy Summary to see if the rule is added correctly.