ZyWALL 5/35/70 Series User’s Guide
Chapter 39 Wireless Setup 544
Figure 301 Menu 7.2: TCP/IP and DHCP Ethernet Setup
Menu 7.2 - TCP/IP and DHCP Ethernet Setup
DHCP= None TCP/IP Setup:
Client IP Pool:
Starting Address= N/A IP Address= 0.0.0.0
Size of Client IP Pool= N/A IP Subnet Mask= 0.0.0.0
RIP Direction= None
Version= N/A
Multicast= IGMP-v2
Edit IP Alias= No
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to
Section
35.4 on page 523 for information on how to configure these fields.
Note: DMZ, WLAN and LAN IP addresses must be on separate subnets. You must
also configure NAT for the WLAN port (see
Chapter 42 on page 558) in menus
15.1 and 15.2.
39.2.2 IP Alias Setup
You must use menu 7.2 to configure the first network. Move the cursor to the Edit IP Alias
field, press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and
third network.
Pressing [ENTER] opens Menu 7.2.1 - IP Alias Setup, as shown next.