A SERVICE OF

logo

ENWW 13
*The top and bottom margins of banner paper refer to the space between individual sheets in the
banner paper.
Note When you are using the auto-duplex unit, the minimum top and bottom margin must match or
exceed 12.7 mm (0.5 inch).
Loading media
This section provides instructions for loading media into the printer.
To load tray 1 or tray 2
1 Pull the tray out of the printer by grasping under the front of the tray.
2 If you are loading tray 1, raise the output tray.
3 If the media is too long, move the latch on the front of the tray to the right and lower the
front of the tray.
Media Left margin Right margin Top margin Bottom margin
U.S. Letter, U.S. Legal, A4,
U.S. Executive,
U.S. Statement, ISO B5,
A5, cards, custom-size
media
3.3 mm
(0.13 inch)
3.3 mm
(0.13 inch)
1.8 mm
(0.069 inch)
11.7 mm
(0.46 inch)
Envelopes
11.7 mm
(0.46 inch)
11.7 mm
(0.46 inch)
3.3 mm
(0.13 inch)
3.3 mm
(0.13 inch)
Photo media (4 by 6
inches, or 101.6 by 152.4
mm) with tear-off tab
3.0 mm
(0.12 inch)
3.0 mm
(0.12 inch)
3.0 mm
(0.12 inch)
3.0 mm
(0.12 inch)
Banner paper 3.3 mm
(0.13 inch)
3.3 mm
(0.13 inch)
0.0 mm*
(0.0 inch)
0.0 mm*
(0.0 inch)
Letter/A4
Legal