ENWW 43
Interpreting control panel lights
Note If the printer supports wireless communication but is connected to a wired network,
the Configuration Page button does not turn on.
Light pattern Light description Explanation and
recommended action
No lights are on. The printer is off.
z Connect the power cable.
z Press the (Power button).
Configuration Page button is
off. The Power light is on.
The printer is turned on and idle. It is
connected using a USB or parallel cable.
z No action is required.
The printer is turned on and idle. It is
connected to a network using a network
cable or wireless communication.
z If the printer is connected using a
network cable, check the network
connector lights to verify that the
printer is connected to the network.
See Network connector lights.
z If the printer is connected using
wireless communication, make sure
that the wireless communication
settings are set correctly.
See Configuring wireless
communication options.
z Verify that the printer is set up
properly on the network.
See Problems connecting to a
network.
Configuration Page button is
green. Power light is on.
The printer is connected to a wired
network. It is turned on and idle.
z No action is required.
Configuration Page button is
blue. Power light is on.
The printer is connected to a wireless
network. It is turned on and idle.
z No action is required.
The Power light blinks. The printer is turning on or off or
processing a print job, or a print job has
been cancelled.
z No action is required.
The printer is pausing for the ink to dry.
z Wait for the ink to dry.
