ENWW 69
To share the printer with other computers
You must install the printer software on each computer that will use the printer. Follow the
steps beginning on page 10 to install the printer software on other computers that will use
the printer.
Advanced setup
For instructions on configuring the printer to operate on ad hoc networks other than the
hpsetup factory default, visit HP’s Web site at http://www.hp.com/support/businessinkjet1200.
Configuring the printer (Mac OS)
You can use the printer with a single Macintosh computer using a USB cable, or you can
share the printer among other users on a network.
To install the software for network or direct connection
1 Connect the printer to the computer with the USB cable or to the network with a network
cable.
2 Insert the Starter CD into the CD-ROM drive. The CD menu starts automatically.
If the CD menu does not start automatically, double-click the CD icon on the desktop,
and then double-click the Setup icon.
3 Click Install Driver and follow the instructions on the screen for your connection type.
4 Complete the installation:
Mac OS 9 (9.1 or later)
a When prompted, restart the computer.
b Select Chooser from the Apple menu.
c Select hp inkjet 6.x in the upper left window of the Chooser window, where x
represents the version of the current printer driver.
d Select the printer in the right window of the Chooser screen.
e Close the Chooser.
f To share the printer, see To share the printer on a locally shared network.
Mac OS X (10.1.5 or later)
a Open the Print Center, which is located in the Applications\Utilities folder.
bClick Add Printer.
c For a direct connection, select USB from the menu.
-Or-
For a network connection on an IP network, on the pop-up menu, select
HP IP Printing, and then type the IP address for the printer, or select Rendezvous.
d Select the printer from the printer list, and then click Add. A mark appears beside the
printer name, indicating that this printer is now the default printer.
e Close the Print Center.
