v System-locator LED: Use this LED to visually locate the server among other
servers.
v Video connector: Connect a monitor to this connector. The video connectors on
the front and rear of the server can be used simultaneously.
v Serial connector: Connect a 9-pin serial device to this connector. The serial port
is shared with the integrated management module (IMM). The IMM can take
control of the shared serial port to redirect serial traffic, using Serial over LAN
(SOL).
v USB connectors: Connect a USB device, such as a USB mouse, keyboard, or
other device to any of these connectors.
v Ethernet link LEDs: When these LEDs are lit, they indicate that there is an
active link connection on the 10BASE-T, 100BASE-TX, or 1000BASE-TX
interface for the Ethernet port.
v Ethernet connectors: Use either of these connectors to connect the server to a
network. When you use the Ethernet 1 connector, the server's network can be
shared with the IMM using a single network cable.
v Systems-management Ethernet connector: Use this connector to manage the
server using a dedicated management network. By using this connector, IMM
cannot be accessed directly from production network. A dedicated management
network provides additional security by physically separating the management
network traffic from the production network. You can use the UEFI Setup Utility to
configure the server to use a dedicated systems management network or a
shared network.
26 ThinkServer RD210 Types 3795, 3796, 3818, and 3819: Installation and User Guide
