Table 9. Memory-mirroring mode DIMM population sequence (continued)
DIMMs
Number of installed
microprocessors DIMM connector
Third pair of DIMMs 1 1, 4
Fourth pair of DIMMs 2 14, 11
Fifth pair of DIMMs 2 13, 10
Sixth pair of DIMMs 2 12, 9
Note: DIMM connectors 7, 8, 15, and 16 are not used in memory-mirroring mode.
v When you install or remove DIMMs, the server configuration information
changes. When you restart the server, the system displays a message that
indicates that the memory configuration has changed.
The following illustration shows the location of the DIMMs connectors on the system
board.
62 ThinkServer RD210 Types 3795, 3796, 3818, and 3819: Installation and User Guide
