Configuring and Managing IP Interfaces and Services 125
Nortel WLAN Security Switch 2300 Series Configuration Guide
Changing SSH Timeouts
To change the SSH timeout values, use the following commands:
set ip ssh idle-timeout minutes
set ip ssh absolute-timeout minutes
To change the absolute timeout value to 30 minutes, type the following command:
23x0# set ip ssh absolute-timeout 30
success: absolute timeout set to 30 minutes
Managing SSH Server Sessions
Use the following commands to manage SSH server sessions:
show sessions admin
clear sessions admin ssh [session-id]
These commands display and clear SSH server sessions.
To display the SSH server sessions on a WSS, type the following command:
23x0# show sessions admin
Tty Username Time (s) Type
------- -------------------- -------- ----
tty0 3644 Console
tty2 tech 6 Telnet
tty3 sshadmin 381 SSH
3 admin sessions
To clear all SSH server sessions, type the following command:
23x0# clear sessions admin ssh
This will terminate manager sessions, do you wish to continue? (y|n) [n]y
Cleared ssh session on tty3
(To manage Telnet client sessions, see “Logging In to a Remote Device” on page 151.)
Note. If you type the clear sessions admin ssh command from within an SSH session,
the session ends as soon as you press Enter.
